OUR MMT® PIPE MARKINGS

MMT® PIPE MARKINGS

Heavy Duty MMT® for outside use, VDB-SCT-Standard and Polyester for all applications.

vdb international MMT®

MMT® PIPE MARKINGS FOR PIPELINES

Image

Heavy duty outside use

  • Special protectionlaminate VDB-UV-Longlifetime, good resistance against UV-radiation and many chemical products
  • Colourhard ink: UV-RES-Longlifetime holds up to 7 years.
  • MMT® is scratch proof and impactresistant.
  • Selfcleaning, flexible, water resistant.
  • Suitable for any type of pipeline, even chrome nickle.
  • MMT® is resistant for temperatures from -40°C up to +90°C, upon request up to +160°C.
  • The marking does not release after correct montage and use of edge-seal-tape.
  • For inside and outside use.
Image

Reading distance

  • Maximum sized texts and symbols depending on reading distance.
  • Best readable font as you request
  • All colours for your desired norm colours or company norm.
  • Visible from all directions with the most optimal readability
  • RAL colours for industrial pipelines according to the Dutch/Belgium Standard NEN3050/NBN69
MMT® pipe marking

Montage

  • MMT® Pipe markings with an overlap of 10-20%, that the two ends overlap eachother independent of the diameter. Watch carefully that the pipe marking has been attached accurately onto eachother.
  • Big advantage! When placing the pipe marking with overlap, makes the cleaning of the pipelines not neccessairy.
  • You save up to 70% on montagetime!
  • Beware! To extend the lifespan of your markings you should overlap, clean the pipeline and use edge-seal-tape

DIN 2403

Type Ral Colour Extra Colour Text Colour
Oxygen RAL5005 White
Water RAL6032 White
Steam RAL3001 White
Air RAL7004 Black
Flammable Gasses RAL1003 RAL3001 Black
Non-flammable Gasses RAL1003 RAL9004 Black
Acids RAL2010 Black
Alkalis RAL4008 White
Flammable Liquids RAL8002 RAL3001 White
Non-flammable Liquids RAL8002 RAL9004 White

NBN 69/NEN 3050

Type Ral Colour Text Colour
Water RAL6010 White
Steam RAL9006 Black
Liquid fuels RAL8001 White
Gasses RAL1004 Black
Acids & Alkalis RAL4001 White
Air RAL5012 White
Non-flammable Liquids RAL9005 White

ANSI/ASME A13.1



Type Ral color Text color
Defined applications
Firefighting Fluids Red White
Toxic & Corrosive Liquids Orange Black
Flammable & Oxidizing Liquids Geel Black
Flammable Liquids Brown White
Cooling-, Boiler-, Feed- and other water Green White
Compressed Air Blue White
Undefined applications
Defined by user Purple White
Defined by user White Black
Defined by user Grey White
Defined by user Black White
Special applications
Vacuum White/Black Black
Medical Air Geel/Black Black

ACCORDING TO EUROPEAN STANDARDS, NEN 3050, NBN 69, DIN 2403

Our MMT® marking tapes for pipelines meet on all the Europese mandatory terms, like the guideline 92/58/EEG. Here has been recorded that dangerous substances with warningsymbols, that the substance-identificationcolours and also the (neccessary) flowdirection arrows have to be marked.

Your pipe marking has to be, according to the Europese law and the neccessary Standards, to look like the following:

    MMT®
  • Name of formulation of the medium and eventual supplementary texts (like bar, %, °C, …)
  • Colourcode (standard RAL) from the medium (e.g. natural gas = yellow RAL1004)
  • Mandatory law warning symbols (e.g. natural gas = GHS02, GHS04)
  • Flowdirectionarrow or pendulumarrow (changing flowdirection of the medium)

Where has to be marked to follow a pipeline network in a most optimal way?

  • At pipe bridges, where pipes enter floors and walls.
  • At control-, maintenance locations and pumps.
  • At seals, valves, hoseconnections, tanks and barrels.
  • At turns, branchings, joints and multiple pipelines

PIPE MARKING FORMATS

Our pipe markings have different formats for different pipeline diameters.

pipe marking template XS without GHS symbol
XS (width 70mm)
  • Type: Extra Small
  • For pipelines with a diameter < 30 mm
  • Available for all markings without GHS symbols.
pipe marking template XS with GHS symbol
XS + GHS (width 90mm)
  • Type: Extra Small with GHS
  • For pipelines with a diameter < 30 mm
  • Available for all markings with GHS symbols.
pipe marking template S without GHS symbol
S (width 90mm)
  • Type: Small
  • For pipelines with a diameter < 70 mm
  • Available for all markings without GHS symbols.
pipe marking template S with GHS symbol
S + GHS (width 110mm)
  • Type: Small with GHS
  • For pipelines with a diameter < 70 mm
  • Available for all markings with GHS symbols.
pipe marking template M without GHS symbol
M (width 90mm)
  • Type: Medium
  • For pipelines with a diameter > 70 mm
  • Available for all markings without GHS symbols.
pipe marking template M with GHS symbol
M + GHS (width 137mm)
  • Type: Medium with GHS
  • For pipelines with a diameter > 70 mm
  • Available for all markings with GHS symbols.
pipe marking template L without GHS symbol
L (width 160mm)
  • Type: Large
  • For pipelines with a diameter < 300 mm
  • Available for all markings without GHS symbols.
pipe marking template XL with GHS symbol
XL +GHS (width 240mm)
  • Type: Extra Large with GHS
  • For pipelines with a diameter < 300 mm
  • Available for all markings with GHS symbols.

MMT® Custom pipe markings

Contact us for your custom designed MMT® pipe markings